Hyundai Palisade: Differential Carrier Assembly / Components and components location

1. Rear differential carrier
assembly
2. Rear driveshaft assembly
|
3. Coupling Assembly
4. Propeller shaft assembly
|

1. Pinion lock nut
2. Pinion oil seal
3. Pinion front bearing
4. Pinion front bearing outer race
5. Differential oil seal
6. Differential case
7. Pinion rear bearing outer race
8. Pinion bearing spacer
|
9. Drive gear
10. Ring gear
11. Bearing cap
12. Spacer
13. Side bearing outer race
14. Gear carrier assembly
15. Differential rear cover.
|
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2...
Other information:
Description and operation
Description
The photo sensor is located at the center of the defrost nozzles.
The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The
solar radiation received by its light receiving portion, generates an electromotive
force in proportion to the amount of radiation received which is transferred
to the automatic temperature control module so that the solar radiation compensation
will be performed...
Roof Side Rails
If your vehicle comes equipped with
roof side rails, then roof rack crossbars
can be installed on top of your
vehicle.
The roof rack crossbars are an
accessory and are available at your
local HYUNDAI dealer.
NOTICE
If the vehicle is equipped with a
sunroof, be sure not to position
cargo onto the roof rack in such a
way that it could interfere with
sunroof operation...
Categories

The SRS consists of the following
components:
1. Driver's front air bag module
2. Passenger's front air bag module
3. Side air bag modules
4. Curtain air bag modules
5. Retractor pre-tensioner
6. Air bag warning light
7. SRS control module (SRSCM)/
Rollover sensor
8. Front impact sensors
9. Side impact sensors
10.Side pressure sensors
11. Occupant classification system
12. Driver’s knee airbag module
read more