Hyundai Palisade: Power Liftgate / Opening the liftgate
The power liftgate will open automatically
by doing one of the following:

Smart key liftgate unlock button
Press and hold the liftgate unlock
button on the smart key.

Power liftgate handle switch
Press the liftgate outside handle
switch while having the smart key
with you.

Power liftgate button
Press the power liftgate button for
approximately one second.
In order to suddenly stop the movement
of the liftgate while it is operating,
quickly press the power liftgate
button.
Power liftgate button
Power liftgate setting
When the ignition switch is in the ON
position and the shift button is in P
(Park), the power liftgate can be
opened by using the console button
on the dash...
The power liftgate will close automatically
by doing one of the following:
Smart key liftgate unlock button
Press and hold the liftgate unlock
button on the smart key when the liftgate
is opened...
Other information:
Description and operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one
of the most important sensors of the engine control system. Lack of CKPS signal
may cause the engine to stop. Installed on the cylinder block or the transaxle
housing, it generates alternating current by magnetic flux field made from the
sensor and the target wheel during engine runnig...
Repair procedures
Replacement
[Front]
1.
Remove the roof trim assembly.
(Refer to Roof Trim - "Roof Trim Assembly")
2.
Remove the front sunroof glass.
(Refer to Sunroof - "Sunroof Glass")
3...
Categories

To lock your vehicle using the door
handle button or the Smart Key:
1.Make sure all doors, the hood and
the liftgate are closed.
2.Make sure you have the smart key
in your possession.
read more