Hyundai Palisade: Automatic Transaxle Control System / Description and operation

Hyundai Palisade (LX2) 2020-2025 Service Manual / Automatic Transaxle System (A8LF1) / Automatic Transaxle Control System / Description and operation

Description

•	Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values.

•	These values are used to control the actuators and achieve the desired control output.

•	If a problem with the drivetrain, including the transaxle, has been identified, perform self-diagnosis and basic transaxle inspection (oil and fluid inspection) and then check the control system's components using the diagnosis tool. Control System Composition

Automatic Transaxle Control System

Repair procedures

Adjustment TCM Learning 1. Overview and purpose of learning 1) The purpose is to ensure the initial operation safety by correcting the oil pressure differences between transmissions...

Other information:

Hyundai Palisade (LX2) 2020-2025 Service Manual: High Mounted Stop Lamp

Repair procedures Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. (Refer to Body - "Rear Spoiler") 3...

Hyundai Palisade (LX2) 2020-2025 Service Manual: Repair procedures

Compression Pressure Inspection • If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure...

Categories

Seat Belt Warning Light

Seat belt warning light

Hyundai Palisade. Seat Belt Warning Light

Driver's seat belt warning

As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. At this time, if the seat belt is not fastened a warning chime will sound for 6 seconds.