Hyundai Palisade: Steering System / Repair procedures
Service Adjustment Procedure
|
Steering Wheel Play Inspection |
1. |
Turn the steering wheel so that the front wheels can face straight ahead.
|
2. |
Measure the distance that the steering wheel can be turned with out
moving the front wheels.
Standard value : 0 - 30mm (1.1811in.) or less
|

|
3. |
If the play exceeds standard value, inspect the steering column, shaft,
and linkages.
|
Checking Stationary Steering Effort |
4. |
Position the vehicle on a level surface and place the steering wheel
in the straight ahead position.
|
5. |
Start the engine and turn the steering wheel from lock to lock several
times to warm up the power steering fluid.
|
6. |
Attach a spring scale to the steering wheel. With the engine speed 500
- 700RPM, pull the scale and read it as soon as the tires begin to turn.

|
7. |
If the measured value exceeds standard value, inspect the power steering
gear box and pump.
|
Troubleshooting
Symptom
Probable cause
Remedy
Play in steering
Loose yoke plug
Retighten
Loose steering gear mounting bolts
Retighten
Loose or worn tie rod end
Retighten or replace as necessary
Steering wheel operation is not smooth (Insufficient power assist)
V-belt slippage
Readjust
Damaged V-belt
Replace
Low fluid level
Replenish
Air in the fluid
Bleed air
Twisted or damaged hoses
Correct the routing or replace
Insufficient oil pump pressure
Repair or replace the oil pump
Sticky flow control valve
Replace
Excessive internal oil pump leakage
Replace the damaged parts
Excessive oil leaks from rack and pinion in gear box
Replace the damaged parts
Distorted or damaged gear box or valve body seals
Replace
Steering wheel does not return properly
Excessive turning resistance of tie rod end
Replace
Yoke plug excessively tight
Adjust
Tie rod and/or ball joint cannot turn smoothly
Replace
Loose mounting of gear box mounting bracket Worn steering shaft joint and/or
Retighten
Worn steering shaft joint and / or body grommet
Correct or replace
Distorted rack
Replace
Damaged pinion bearing
Replace
Twisted or damaged hoses
Reposition or replace
Damaged oil pressure control valve
Replace
Damaged oil pump input shaft bearing
Replace
Noise
Hissing Noise in Steering Gear
There is some noise with all power steering systems...
Other information:
Release Residual Pressure
in Fuel Line
•
Whenever the high pressure fuel fuse, fuel pipe, delivery pipe,
or injector is removed immediately after shutting off the engine,
an injury may be caused by the release of highly pressurized
fuel...
To unlock your vehicle:
1.Make sure you have the smart key
in your possession.
2.Press either the button on the door
handle or the Door Unlock button
(2) on the smart key. The driver's
door will unlock and the hazard
warning lights will blink two times...
Categories

If the remote key is not working properly,
try replacing the battery with a
new one.
Battery Type: CR2032
To replace the battery:
read more