Hyundai Palisade: Steering System / Special service tools

Specifications

Specifications Item Specification Type Electric Power Steering System Steering gear Type Rack & Pinion Rack stroke 156 ± 1 mm (6...

Troubleshooting

Troubleshooting Symptom Probable cause Remedy Play in steering Loose yoke plug Retighten Loose steering gear mounting bolts Retighten Loose or worn tie rod end Retighten or replace as necessary Steering wheel operation is not smooth (Insufficient power assist) V-belt slippage Readjust Damaged V-belt Replace Low fluid level Replenish Air in the fluid Bleed air Twisted or damaged hoses Correct the routing or replace Insufficient oil pump pressure Repair or replace the oil pump Sticky flow control valve Replace Excessive internal oil pump leakage Replace the damaged parts Excessive oil leaks from rack and pinion in gear box Replace the damaged parts Distorted or damaged gear box or valve body seals Replace Steering wheel does not return properly Excessive turning resistance of tie rod end Replace Yoke plug excessively tight Adjust Tie rod and/or ball joint cannot turn smoothly Replace Loose mounting of gear box mounting bracket Worn steering shaft joint and/or Retighten Worn steering shaft joint and / or body grommet Correct or replace Distorted rack Replace Damaged pinion bearing Replace Twisted or damaged hoses Reposition or replace Damaged oil pressure control valve Replace Damaged oil pump input shaft bearing Replace Noise Hissing Noise in Steering Gear There is some noise with all power steering systems...

Other information:

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: How to reset the power liftgate

If the battery has been discharged or disconnected, or if the power liftgate fuse has been replaced or removed, reset the power liftgate by performing the following procedure: 1. Press the P (Parking) button. 2. Press the power liftgate inner button and the power liftgate outer handle button simultaneously for more than 3 seconds...

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: Fan speed control, Temperature control

Fan speed control 1. Press the rear climate control button of the front climate control system. 2. The fan speed can be set to the desired speed by pushing the fan speed control button. The higher the fan speed is, the more air is delivered. Pressing the OFF button turns off the fan...