Hyundai Palisade: Power Liftgate / How to reset the power liftgate
If the battery has been discharged or
disconnected, or if the power liftgate
fuse has been replaced or removed,
reset the power liftgate by performing
the following procedure:
1. Press the P (Parking) button.
2. Press the power liftgate inner button
and the power liftgate outer
handle button simultaneously for
more than 3 seconds. The chime
will sound.
3. Close the liftgate manually.
If the power liftgate does not work
properly after the above procedure,
have the system checked by an
authorized HYUNDAI dealer.
NOTICE
When operating the power liftgate,
the gear shift button must be in
the (P) park position in order to
operate normally.
During power opening and closing if
the power liftgate is blocked by an
object or part of the body, the power
liftgate may be able to detect the
resistance...
Follow the instructions below to set
the fully open height of the power liftgate:
1. Position the liftgate manually to
the height you prefer.
2. Press the power liftgate inner button
for more than 3 seconds...
Other information:
Component Location
1. Backlest motor
2. Front height motor
3. Cushion extension motor
4. Lumber support motor
5. Rear height motor
6. Slide motor
7. Slide switch
8. Backrest switch
9. Lumber support switch
10...
The SRS is virtually maintenancefree
and there are no parts you can
safely service by yourself. If the SRS
air bag warning light does not illuminate
when the ignition switch is in the
ON position, or continuously remains
on, have your vehicle immediately
inspected by an authorized HYUNDAI
dealer...
Categories

1. Driver's front air bag
2. Passenger's front air bag
3. Side air bag
4. Curtain air bag
5. Driver’s knee airbag
This vehicle is equipped with an
Advanced Supplemental Air Bag
System for the driver's seat and front
passenger's seats.
read more