Hyundai Palisade: TRIP Computer (Cluster type A and type B) / Accumulated Info display
This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3).
The information is accumulated starting from the last reset.
To reset the details, press and hold the OK button when viewing the Accumulated driving info. The trip distance, the average fuel economy, and total driving time will reset simultaneously.
The accumulated driving information will continue to be counted while the engine is still running (for example, when the vehicle is in traffic or stopped at a stop light).
Information
The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated.
Average fuel economy/
Instant fuel economy
Average Fuel Economy (1)
The average fuel economy is calculated
by the total driving distance
and fuel consumption since the last
average fuel economy reset...
Drive Info display
This display shows the trip distance
(1), the average fuel economy (2),
and the total driving time (3).
The information is combined for each
ignition cycle...
Other information:
Hyundai Palisade (LX2) 2020-2025 Owner's Manual: Brake fluid
Checking the Brake Fluid Level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake fluid, clean the area around the reservoir cap thoroughly to prevent brake fluid contamination...
Hyundai Palisade (LX2) 2020-2025 Service Manual: Transaxle Control Module (TCM)
Components and components location Components Location 1. Transaxle control module(TCM) Description and operation Description • Monitoring the vehicle's operating conditions to determine the optimal gear setting...
Categories
- Manuals Home
- 1st Generation Palisade Owners Manual
- 1st Generation Palisade Service Manual
- Electronic Child Safety Lock System
- AC Inverter
- Electrochromatic Mirror (ECM) with homelink system
- New on site
- Most important about car
Seat Belt Warning Light
Seat belt warning light
Driver's seat belt warning
As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. At this time, if the seat belt is not fastened a warning chime will sound for 6 seconds.
