Hyundai Palisade: Manual Temperature Control
Mode / Fan speed control
The fan speed can be set as desired
by pushing the fan speed control button.
More air is delivered with higher fan
speeds.
Pressing the OFF button turns off the
fan.
Information
For better sound quality, fan speed
may automatically slow down for a
couple of minutes when you activate
voice recognition or hands free.
NOTICE
Operating the fan when the ignition
switch is in the ON position
could cause the battery to discharge.
Operate the fan when the
engine is running.
The air intake control button is used
to select either Fresh mode (outside
air) or Recirculation mode (cabin air).
Recirculation mode
When Recirculation mode
is selected, air from the
passenger compartment
will be recirculated
through the system and
heated or cooled
according to the function
selected...
Air conditioning (7)
Push the A/C button to manually turn
the system on (indicator light will illuminate)
and off.
OFF mode (5)
Push the OFF button to turn the climate
control system off...
Other information:
If the remote key is not working properly,
try replacing the battery with a
new one.
Battery Type: CR2032
To replace the battery:
1.Insert a slim tool into the slot and
gently pry open the cover.
2.Using a screw driver, remove the
battery cover.
3...
Components and components location
Component Location
Second line Seat
Luggage Side Trim
Schematic diagrams
Circuit Diagram
Repair procedures
Removal
Actuator
1.
Remove the rear seat...
Categories
The front seat can be adjusted by
using the levers located on the outside
of the seat cushion. Before driving,
adjust the seat to the proper
position so that you can easily control
the steering wheel, foot pedals
and controls on the instrument
panel.

read more