Hyundai Palisade: Smart Key System / Specifications

Hyundai Palisade (LX2) 2020-2025 Service Manual / Body Electrical System / Smart Key System / Specifications

Specifications

Smart Key Unit

Items	Specification
Rated voltage	DC 12V
Operating voltage	DC 9 - 16V
Operating temperature	-22°F to 167°F (-30°C to- 75°C)
Load	Max. 4.0mA (When welcome light function off)

Smart Key Fob

Items

Specification

Battery

Lithium battery 3V 1EA

Distance

30m from vehicle, RF : 30m, Passive(LF) : 0.7m

Battery life

More than 2 years (10 times / a day)

An inappropriately disposed battery can be harmful to the environment and human health.

Dispose the battery according to your local law(s) or regulation.

Push buttons

5 (Door lock / unlock, Tailgate, Panic/ Button remote start)

Frequency(Rx)

125 kHz

Frequency(Tx)

433.92 MHz

Numbers

2EA

Antenna

Items	Specification
Rated voltage	DC 12V
Operating voltage	DC 9 - 16V
Operating temperature	-22°F to 185°F (-40°C - 85°C)
Frequency	125kHz
Numbers	Interior (3EA), Door (2EA), Bumper -(1EA)

Smart Key System

Components and components location

Component Location (1) 1. Integrated Body Control Unit (IBU) 2. Buzzer 3. Door outside handle 4. Interior antenna 2 5...

Other information:

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: Battery saver function, Headlamp delay function

Battery saver function The purpose of this feature is to help prevent the battery from being discharged. The system automatically turns off the parking lamp when the driver turns the vehicle off and opens the driver-side door. With this feature, the parking lamps will turn off automatically if the driver parks on the side of road at night...

Hyundai Palisade (LX2) 2020-2025 Service Manual: Troubleshooting

Troubleshooting Symptom Passible Cause Remedy (Refer to page) Water leaks from sunroof Deteriorated roof lid weatherstrip Replace Excessive roof lid-to-body clearance and improperly fitted weatherstrip Adjust Wind noise around sunroof Loose or deformed deflector, gaps in body work Retighten adjust or replace Noise created by moving sunroof lid Foreign particles lodged in guide rail Check drive cable and guide rails for foreign particles Loose guide rails and lid Retighten Motor runs but sunroof does not move or moves only partially Foreign particles lodged in guide rail Adjust or replace Incorrect engagement of motor pinion with drive cable Decrease in motor's clutch slipping force Increased sunroof sliding resistance or interference of sunroof with drive cables, weatherstrip, etc...