Hyundai Palisade: Front Door / Front Door Inside Handle
Repair procedures
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. |
Loosen the mounting screws and remove the front door inside handle (A).
|
3. |
To install, reverse removal procedure.
•
|
Make sure the door locks / unlocks and opens / closes
properly.
|
•
|
Replace any damaged clips (or pin-type retainers).
|
|
|
Components and components location
Component Location
1. Front door trim
Repair procedures
Replacement
•
Put on gloves to prevent hand injuries...
Components and components location
Component Location
1. Front door window glass
Repair procedures
Replacement
•
Put on gloves to prevent hand injuries...
Other information:
Description and operation
Description
•
When TCM supplies variable current to solenoid valve, hydraulic pressure
of UD clutch is controlled directly by solenoid valve.
•
UD Clutch control solenoid valve is a Variable Force Solenoid (VFS)
type...
This warning light illuminates if the
ignition switch is set to the ON position
and goes off in approximately 3
seconds if the system is operating
normally.
If the EPB malfunction indicator
remains on, comes on while driving,
or does not come on when the ignition
switch is changed to the ON
position, this indicates that the EPB
may have malfunctioned...
Categories
If the remote key is not working properly,
try replacing the battery with a
new one.
Battery Type: CR2032
To replace the battery:
read more