Hyundai Palisade: Instrument cluster / Gauges and Meters
Adjusting instrument cluster
illumination
When the vehicle's position lights or
headlights are on, press the illumination
control button to adjust the
brightness of the instrument panel
illumination...
■ Type A and B
■ Type C
The speedometer indicates the
speed of the vehicle and is calibrated
in miles per hour (MPH) and/or kilometers
per hour (km/h)...
Other information:
Cluster ionizer (if equipped)
When the ignition switch is in the ON
position, the clean air function turns
on automatically.
Also, the clean air function turns off
automatically, when the ignition
switch is in the OFF position.
Automatic Ventilation
(if equipped)
When the ignition switch is in the ON
position or when the engine is running
and temperature is below 59°F
(15°C) with the recirculation mode
selected more than three to five minutes,
the air intake position will automatically
change to fresh mode...
The wheels on your vehicle were
aligned and balanced carefully at the
factory to give you the longest tire life
and best overall performance.
In most cases, you will not need to
have your wheels aligned again.
However, if you notice unusual tire
wear or your vehicle pulling one way
or the other, the alignment may need
to be reset...
Categories
Seat belt warning light
Driver's seat belt warning
As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you place the ignition switch to the
ON position regardless of belt fastening.
At this time, if the seat belt is
not fastened a warning chime will
sound for 6 seconds.
read more