Hyundai Palisade: Lane Keeping Assist (LKA) system / LKA System Function Change
The driver can change LKA to Lane
Departure Warning from the LCD
display. Go to the 'User Settings →
Driver Assistance → Lane Safety →
Lane Keeping Assist (LKA)/Lane
Departure Warning (LDW)/Off'.
The system is automatically set to
Lane Keeping Assist(LKA) if a function
is not selected.
- Lane Keeping Assist
Lane Keeping Assist guides the
driver to help keep the vehicle within
the lanes. It rarely controls the
steering wheel, when the vehicle
drives well inside the lanes.
However, it starts to control the
steering wheel, when the vehicle is
about to deviate out of the lane.
- Lane Departure Warning
Lane Departure Warning alerts the
driver with a visual warning and a
warning alarm when the system
detects the vehicle departing the
lane. The steering wheel will not be
controlled.
- Off
If you select 'off', the LKA system is
deactivated.
The LKA system may operate prematurely
even if the vehicle does not
depart from the intended lane, OR,
the LKA system may not warn you if
the vehicle leaves the intended lane
under the following circumstances:
When the lane and road conditions
are poor
It is difficult to distinguish the lane
marker from the road because the
lane marker is covered with dust or
sand...
The Driver Attention Warning (DAW)
system is designed as a safety feature
to help reduce drowsy or inattentive
driving. The DAW displays a
bar graph that is intended to represent
the driver's attention and fatigue
level while driving...
Other information:
Special Service Tools
Tool Name / Number
Illustration
Description
Fuel Pressure Gauge
09353-24100
Used for measuring the pressure in fuel line
Fuel Pressure Gauge Adapter
0K353-D4100
Used for connecting between high pressure fuel pump and low pressure fuel
feed tube to measure the pressure in fuel line
※SST 09353-C1000 also can be used
Heated Oxygen Sensor Socket Wrench
09392-1Y100 (19 mm)
Removal and installation of the heated oxygen sensor
※ SST No...
A vehicle's electrical system is protected
from electrical overload damage
by fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver's side panel
bolster, the other in the engine compartment
near the battery.
If any of your vehicle's lights, accessories,
or controls do not work, check
the appropriate circuit fuse...
Categories
The front seat can be adjusted by
using the levers located on the outside
of the seat cushion. Before driving,
adjust the seat to the proper
position so that you can easily control
the steering wheel, foot pedals
and controls on the instrument
panel.

read more