Hyundai Palisade: Smart Cruise Control With Stop & Go System / To Convert to Cruise Control Mode
The driver may choose to switch to use the conventional Cruise Control mode (speed only control function) by following these steps:
1. Push the CRUISE button on the
steering wheel to turn the system
on. The cruise (
) indicator
will illuminate.
2. Push and hold the Vehicle-to- Vehicle Distance button for more than 2 seconds.
3. Choose between "Smart Cruise Control" and "Cruise Control".
When the system is canceled using the CRUISE button or the CRUISE button is used after the engine is turned on, the Smart Cruise Control mode will turn on.
WARNING
When using the conventional Cruise Control mode, you must manually adjust the distance to other vehicles by depressing the brake pedal. The system does not automatically adjust the distance to vehicles in front of you.
Adjusting the Sensitivity of
Smart Cruise Control
The sensitivity of vehicle speed
when following the front vehicle to
maintain the set distance can be
adjusted. Go to the 'User Settings →
Driver Assistance → SCC Reaction
→ Fast/Normal/Slow' on the LCD
display...
Smart Cruise Control Speed
To set Smart Cruise Control
speed
1. Push the CRUISE button on the
steering wheel to turn the system
on. The cruise indicator will illuminate.
2. Accelerate to the desired speed...
Other information:
Hyundai Palisade (LX2) 2020-2025 Service Manual: Rear Bumper Cover
Components and components location Component Location 1. Rear bumper cover Repair procedures Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...
Hyundai Palisade (LX2) 2020-2025 Service Manual: Fuel Filler Cap
Description and operation Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gaskets on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating that the seal has been set...
Categories
- Manuals Home
- 1st Generation Palisade Owners Manual
- 1st Generation Palisade Service Manual
- Child-Protector Rear Door Locks
- Fuse/Relay Panel Description
- Emergency liftgate safety release
- New on site
- Most important about car
Rear Seats
Rear seat adjustment
Forward and rearward (2nd row seat)
To move the seat forward or rearward:
1. Pull the seat slide adjustment lever up and hold it.
2. Slide the seat to the position you desire.
